Callaham Vintage Guitars & Parts  

 Callaham Guitars Facebook Page Callaham Guitars Instagram Page Callaham Guitars YouTube Channel  
 
Product Catalog   |   Technical Info   |   About Us   |   Order Direct   |   Dealers   |   Contact


 
Callaham Full Aluminum Pickguard Shield
 

Callaham Full Aluminum Pickguard Shield

These are made from 0.014 thick 6061-T6 aluminum just like what was used on the early 60's strats.

We have made them more versatile by incorporating both the 50's 8-hole pattern and the early 60's 11-hole pattern and you can easily modify it to fit other patterns. It is designed to work with almost anybody's traditional strat guard, with slightly larger holes for clearance. This shield is far superior to foil by allowing you to tighten pots and switches firmly without fear of breaking through a thin foil. You will no longer need ground straps from pot to pot thus eliminating a potential ground loop and unwanted noise. (13 holes)

 
 
Pricing:
 
  Each   $15.00
 
 
 
 
Related Parts
 
Pre-wired S Model Pickguard Assembly Callaham Vintage S Model Strat Hardware Kit Callaham Vintage Back Plate
 
Callaham Pre-wired S Model Pickguard Assembly Callaham Vintage S Model Strat Hardware Kit Callaham Vintage Back Plate
 
 
 
 
  For Ordering Instructions and Shipping Rates, go to our Order Direct page.


Prices and Content subject to change without notice.
 
© 1996-2016 by Callaham Guitars™. All rights reserved.
This website is protected by copyright and trademark laws under U.S. and International law.
All images and content may not be reproduced without written permission of Callaham Guitars™.
Stratocaster®, Strat® & Tele® are registered trademarks of Fender Musical Instruments Corp.
Callaham Guitars™ is not affiliated with Fender Musical Instruments Corp.
This page last modified August 21, 2016
 

 
Callaham Guitars ™ 
 
Home | Product Catalog | Technical Info | About Us | Contact
Order Direct | Printable Order Form | Dealers
Strat® Parts | Tele® Parts | Gibson® Parts | Bigsby® Parts