Callaham Vintage Guitars & Parts  

 Callaham Guitars Facebook Page Callaham Guitars Instagram Page Callaham Guitars YouTube Channel  
 
Product Catalog   |   Technical Info   |   About Us   |   Order Direct   |   Dealers   |   Contact


 
Callaham Steel Height Adjustable Locking Tailpiece Studs
 

Callaham Steel Height Adjustable Locking Tailpiece Studs

These studs and inserts are made from steel bar and they are the only stud available that allows for the tailpiece to be raised and still remain fully locked to the body. They are only available in 5/16"-24 thread which is standard on Gibson instruments.


Installation of Callaham Tailpiece Studs:

Studs are made to fit guitars with 5/16"-24 threaded inserts. If you have these inserts, do not remove them.

The inserts we provide are only for new construction.

Studs come with 3 graduated bushings to set the tailpiece to accommodate different back angle requirements you may encounter.
The tallest set of bushings is to simulate "top wrapping" of the tailpiece for the least amount of back angle.
The thinniest bushings replicate the height of a stock Gibson stud fully installed.
All 3 bushings have their advantages and only through experimentation will you find what you like best.
When tightening the studs DO NOT USE A SCREWDRIVER. Please use a coin or specialized driver.

Please watch our helpful YouTube video for instructions on installing Callaham Locking Tailpiece Studs.

 
 
Pricing:
 
  Tailpiece Studs   $45.00
 
Optional Charges
 
  Distressed   +$20.00
 
 
 
Related Parts
 
Callaham CNC Machined Steel Billet ABR-1 Bridge Callaham Cold Rolled Steel CNC Machined Gibson Stopbar Tailpiece GHS Burnished Nickel Strings
 
Callaham CNC Machined Steel Billet ABR-1 Bridge Callaham Cold Rolled Steel CNC Machined Gibson Stopbar Tailpiece GHS Burnished Nickel Strings
 
 
 
 
  For Ordering Instructions and Shipping Rates, go to our Order Direct page.


Prices and Content subject to change without notice.
 
© 1996-2016 by Callaham Guitars™. All rights reserved.
This website is protected by copyright and trademark laws under U.S. and International law.
All images and content may not be reproduced without written permission of Callaham Guitars™.
Stratocaster®, Strat® & Tele® are registered trademarks of Fender Musical Instruments Corp.
Callaham Guitars™ is not affiliated with Fender Musical Instruments Corp.
This page last modified Jan. 12, 2016
 

 
Callaham Guitars ™ 
 
Home | Product Catalog | Technical Info | About Us | Contact
Order Direct | Printable Order Form | Dealers
Strat® Parts | Tele® Parts | Gibson® Parts | Bigsby® Parts